Question

The devices which are used to operate the final control element are known as

• A. Gates
• B. Motors
• C. Actuators
• D. Compensators

Hint:

Think of the Controller as the "Brain" and the Actuator as the "Muscle." The Actuator does the heavy lifting to turn the "Valve" (Final Control Element).

Answer 1

The Correct Option is C

1. Defining the Actuator: An

Actuator is a device that receives the low-power control signal (e.g., a 4-20 mA electrical signal or a 3-15 psi pneumatic signal) and converts it into a high-power mechanical motion (linear or rotary).

2. Types of Actuators:

• Pneumatic Actuators: Use compressed air to move a diaphragm or piston. These are the most common in industrial process control.

• Electric Actuators: Use electric motors and gearboxes to provide movement.

• Hydraulic Actuators: Use pressurized oil for applications requiring immense force.

3. Role in the Control Loop: The actuator is the "muscle" of the control system. While a motor (Option 2) is a type of actuator, the term "Actuator" is the correct general classification for any device used to drive the final control element to its required position.