Exams
Subjects
Classes
Home
Chemical, Thermal and Pol...
List of top Chemical, Thermal and Polymer Engineering Questions on Mass Transfer
How does heat transfer enhance due to turbulence?
A. Decrease in thermal resistance.
B. Increase in convective coefficient.
C. Mixing is induced by velocity change.
D. Thinning of boundary layer.
Choose the correct answer from the options given below:
CUET (PG) - 2026
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
Which of the polymer is not prepared by condensation polymerization?
CUET (PG) - 2026
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
For the relationship, $dH=TdS+VdP$, the Maxwell equation is:
CUET (PG) - 2026
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
Which one is not correct relationship?
CUET (PG) - 2026
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
The average degree of polymerization of polystyrene is 1000. The number average molecular weight of polystyrene is:
CUET (PG) - 2026
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
Nylon 6,6 is synthesized by the reaction of adipic acid and hexamethylene diamine. If the extent of reaction is 95% for the equimolar feed ratio of the monomers, then the number average degree of polymerization is:
CUET (PG) - 2026
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
Which law is used to describe steady-state diffusion in gases?
GATE CH - 2026
GATE CH
Chemical, Thermal and Polymer Engineering
Mass Transfer
Match LIST-I with LIST-II and select the correct answer using the codes given below the lists.
\[\begin{array}{|c|c|} \hline \textbf{LIST-I} & \textbf{LIST-II} \\ \hline \text{A. Rotary atomizer} & \text{1. Kinetic energy} \\ \hline \text{B. Relative volatility} & \text{2. Centrifugal energy} \\ \hline \text{C. Pneumatic nozzle} & \text{3. Distillation} \\ \hline \text{D. Selectivity} & \text{4. Liquid-liquid extraction} \\ \hline \end{array}\] Choose the correct answer from the options given below:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
The McCabe-Thiele method used to find the number of theoretical stages required in a distillation operation is based on the assumption(s) that:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
For economical operation in gas absorption, the operating line approximately:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
Which of the following is used as an 'entrainer' in the separation of acetic acid-water mixture by distillation?
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day when it is concentrating from 10% to 35% solids. The water evaporated in kg per day is:
CUET (PG) - 2025
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
In the McCabe-Thiele diagram for binary distillation, vertical feed line represents ......., and horizontal feed line represents ............ feed.
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
Sugar is leached from sugar beets with:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
In a small column, local efficiency is equal to Murphree efficiency, and in a large column, local efficiency is:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
In the absorption of a solute gas from a mixture containing inerts in a solvent, it has been observed that the overall gas transfer coefficient is nearly equal to the individual gas film transfer coefficient. It may therefore be concluded that:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
Flash distillation is used at a large scale in:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
HETP is numerically equal to HTU only when the operating line:
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer
Which of the following is a continuous filter?
CUET (PG) - 2024
CUET (PG)
Chemical, Thermal and Polymer Engineering
Mass Transfer