List of top Textile Design Questions on Polymers and Fiber Materials

Length, strength, flexibility, uniformity and _______ are primary properties that are necessary for a fibre to be called a textile fibre.

Assertion (A): Aramid fabrics are used extensively in protective clothing.
Reason (R): Aramid fibres exhibit high strength and high flammability. Choose the most appropriate answer from the options given below:

Match List - I with List - II.

List - I	List - II
A. Nomex	I. Manmade Cellulosic Fibres
B. Kapok	II. Animal Protein Fibres
C. Mohair	III. High Performance Fibres
D. Tencel	IV. Natural Cellulosic Fibres

Choose the correct answer from the options given below :

Match List - I with List - II.

List - I	List - II
A. Flax	I. Leaf
B. Banana	II. Stem
C. Kapok	III. Fruit
D. Coir	IV. Seed hair

Choose the correct answer from the options given below :

Match List - I with List - II.

List - I (Microscopic Appearance)	List - II (Fiber)
A. Convolutions	I. Wool
B. Smooth	II. Silk
C. Scales and crimp	III. Cotton
D. Smooth and crimped	IV. Rayon

Choose the correct answer from the options given below :

Match List - I with List - II.

List - I	List - II
A. Kevlar	I. PBO
B. Dyneema	II. HDPE
C. Zylon	III. PPS
D. Ryton	IV. Aramid

Choose the correct answer from the options given below :

Titanium Oxide and Geranium Oxide are added in dope solution before spinning of the manufactured fibers as:

Linen is a generic name for ................

Write the sequence of mechanism of Textile Dyeing.
A. Dissolution of dye molecules in water
B. Absorption of dye into the fiber
C. Dispersion of the dye in the bath
D. Diffusion of dye inside the fiber
Choose the correct answer from the options given below:

Rank the below-mentioned fibers as per their drapability property from high to low.
A. Cotton
B. Flax
C. Wool
D. Silk
Choose the correct answer from the options given below:

Match the LIST-I with LIST-II.

Choose the correct answer from the options given below:

Jig dyeing, Beam Dyeing, Winch Dyeing, Pad Dyeing and Jet Dyeing are all examples of ................ dyeing at the fabric stage.

Wool blend mark signifies that at least ................ % of virgin wool fibers have been blended with only one other fiber.

To the fiber add 85% formic acid at room temperature. Then the fiber dissolves. Identify the fiber.

Which among the below mentioned fibers is not a regenerated fiber?

........... involves printing with a chemical substance which destroys the fiber in the pattern design print area. Thus, a hole/gradation in the fabric is formed where the chemical contacts the fabric.