List of top Textile Design Questions on Loom shed

_____ type of selvedge is used for heavy industrial fabrics made of thermoplastic fibres.

A type of portable loom used in Northeast India that weaves narrow width fabrics:

The order in which warp threads are threaded in the heald shaft is known as:

If the EPI of a fabric is 40 and 50 inch wide fabric is to be woven, then the total warp ends required will be equal to (assuming the whole fabric has same EPI throughout the width of the fabric):

The following are types of shuttle-less looms:
A. Projectile loom
B. Pit loom
C. Treadle loom
D. Rapier loom
E. Air jet loom
Choose the correct answer from the options given below :

A CAD system used to design woven dobby and jacquard designs:

It is a comb-like device placed between the heddle/harnesses and the cloth/fabric beam on a hand loom.

The Institutes of Handloom Technology were established in the year ...........

The necessary weave at the beginning of each warp to spread out the warp ends evenly and to close the gaps left when knotting the warp to the front stick/warp beam in table top loom weaving is called as ................

The full form of HEPC nodal agency constituted under the Ministry of Textiles, Government of India to promote exports of handloom products is ................

The major textile powerloom centres in India are ...........
A. Surat
B. Ahmedabad
C. Bhilwara
D. Kashmir