Question:medium
Vapour Absorption Refrigeration System, normally uses refrigerant.
Vapour Absorption Refrigeration System, normally uses refrigerant.
Show Hint
If a question asks about Absorption systems, think of Ammonia. Then remember that Ammonia is R-717 because its molecular weight is 17 ($N=14, H=1 \times 3$).
Updated On: Jul 1, 2026
- R-12
- R-22
- R-134a
- R-717
Show Solution
The Correct Option is D
Solution and Explanation
1. The Ammonia-Water Pair: The most common pair used in industrial absorption systems is the
Ammonia-Water system.
• Refrigerant: Ammonia acts as the refrigerant because of its excellent thermodynamic properties and high latent heat.
• Absorbent: Water acts as the absorbent because it has a very high affinity for ammonia.
2. Identifying R-717: In the international refrigerant numbering system:
• R-717 is the chemical designation for
Ammonia ($NH_3$).
• The '700' series is used for inorganic refrigerants, and '17' is the molecular weight of ammonia.
3. Why it is Preferred for VARS: Ammonia is highly soluble in water at low temperatures and can be easily separated at higher temperatures in the generator. This makes it the standard choice for absorption cycles, which are often powered by waste heat rather than mechanical compressors.
Ammonia-Water system.
• Refrigerant: Ammonia acts as the refrigerant because of its excellent thermodynamic properties and high latent heat.
• Absorbent: Water acts as the absorbent because it has a very high affinity for ammonia.
2. Identifying R-717: In the international refrigerant numbering system:
• R-717 is the chemical designation for
Ammonia ($NH_3$).
• The '700' series is used for inorganic refrigerants, and '17' is the molecular weight of ammonia.
3. Why it is Preferred for VARS: Ammonia is highly soluble in water at low temperatures and can be easily separated at higher temperatures in the generator. This makes it the standard choice for absorption cycles, which are often powered by waste heat rather than mechanical compressors.
Was this answer helpful?
0
Top Questions on Thermodynamics
- The difference of temperature in a material can convert heat energy into electrical energy. To harvest the heat energy, the material should have:
- JEE Main - 2025
- Physics
- Thermodynamics
- Given below are two statements. One is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A): With the increase in the pressure of an ideal gas, the volume falls off more rapidly in an isothermal process in comparison to the adiabatic process.
Reason (R): In an isothermal process, \( PV = \text{constant} \), while in an adiabatic process \( PV^\gamma = \text{constant} \). Here, \( \gamma \) is the ratio of specific heats, \( P \) is the pressure and \( V \) is the volume of the ideal gas.
In the light of the above statements, choose the correct answer from the options given below:- JEE Main - 2025
- Physics
- Thermodynamics
- A poly-atomic molecule (C\(_3\)R, \(C_v = 4R\), where \(R\) is gas constant) goes from phase space point A (\(P_A = 10^4 \, \text{Pa}, V_A = 4 \times 10^{-3} \, \text{m}^3\)) to point B (\(P_B = 5 \times 10^4 \, \text{Pa}, V_B = 6 \times 10^{-7} \, \text{m}^3\)) to point C (\(P_C = 10^4 \, \text{Pa}, V_C = 8 \times 10^{-3} \, \text{m}^3\)). A to B is an adiabatic path and B to C is an isothermal path. The net heat absorbed per unit mole by the system is:
- JEE Main - 2025
- Physics
- Thermodynamics
- If \[ \text{C(diamond)} \rightarrow \text{C(graphite)} + X \, \text{kj mol}^{-1} \] \[ \text{C(diamond)} + \text{O}_2(g) \rightarrow \text{CO}(g) + Y \, \text{kj mol}^{-1} \] \[ \text{C(graphite)} + \text{O}_2(g) \rightarrow \text{CO}(g) + Z \, \text{kj mol}^{-1} \] At constant temperature. Then:
- JEE Main - 2025
- Chemistry
- Thermodynamics
- Want to practice more? Try solving extra ecology questions todayView All Questions