Question:medium
The ratio of hydraulic stress to the corresponding strain is known as
The ratio of hydraulic stress to the corresponding strain is known as
Show Hint
Associate "Hydraulic" or "Volume" with Bulk, "Longitudinal" or "Length" with Young's, and "Shear" or "Shape" with Rigidity.
Updated On: May 6, 2026
- Compressibility
- Bulk modulus
- Young's modulus
- Rigidity modulus
- Expansion coefficient
Show Solution
The Correct Option is B
Solution and Explanation
Was this answer helpful?
0
Top Questions on Stress and Strain
- One end of a steel wire is fixed to the ceiling of an elevator moving up with an acceleration \( 2 \, \text{m/s}^2 \) and a load of 10 kg hangs from the other end. If the cross-section of the wire is \( 2 \, \text{cm}^2 \), then the longitudinal strain in the wire will be (Take \( g = 10 \, \text{m/s}^2 \) and \( Y = 2.0 \times 10^{11} \, \text{N/m}^2 \)).
- WBJEE - 2025
- Physics
- Stress and Strain
- Two blocks of mass \(2 \, \text{kg}\) and \(4 \, \text{kg}\) are connected by a metal wire going over a smooth pulley as shown in the figure. The radius of the wire is \(4.0 \times 10^{-5} \, \text{m}\) and Young's modulus of the metal is \(2.0 \times 10^{11} \, \text{N/m}^2\). The longitudinal strain developed in the wire is \(\frac{1}{\alpha \pi}\). The value of \(\alpha\) is _____. [Use \(g = 10 \, \text{m/s}^2\)]
- JEE Main - 2024
- Physics
- Stress and Strain
- A steel cable with a radius of 1.5 cm supports a chairlift at a ski area. If the maximum stress is not to exceed 108 N m–2, what is the maximum load the cable can support ?
- CBSE Class XI
- Physics
- Stress and Strain
- A piece of copper having a rectangular cross-section of 15.2 mm × 19.1 mm is pulled in tension with 44,500 N force, producing only elastic deformation. Calculate the resulting strain?
- CBSE Class XI
- Physics
- Stress and Strain
- Want to practice more? Try solving extra ecology questions todayView All Questions
