Question:medium
The lower edge of a square slab of side $50$ cm and thickness $20$ cm is rigidly fixed to the base of a table. A tangential force of $30$ N is applied to the slab. If the shear modulus of the material is $4 \times 10^{10}$ N/m$^2$, then displacement of the upper edge, in meters, is}
The lower edge of a square slab of side $50$ cm and thickness $20$ cm is rigidly fixed to the base of a table. A tangential force of $30$ N is applied to the slab. If the shear modulus of the material is $4 \times 10^{10}$ N/m$^2$, then displacement of the upper edge, in meters, is}
Show Hint
Always identify area perpendicular to force when calculating stress.
Updated On: May 1, 2026
- $4 \times 10^{-12}$
- $4 \times 10^{-10}$
- $6 \times 10^{-10}$
- $6 \times 10^{-12}$
- $8 \times 10^{-10}$
Show Solution
The Correct Option is C
Solution and Explanation
Was this answer helpful?
0
Top Questions on Stress and Strain
- One end of a steel wire is fixed to the ceiling of an elevator moving up with an acceleration \( 2 \, \text{m/s}^2 \) and a load of 10 kg hangs from the other end. If the cross-section of the wire is \( 2 \, \text{cm}^2 \), then the longitudinal strain in the wire will be (Take \( g = 10 \, \text{m/s}^2 \) and \( Y = 2.0 \times 10^{11} \, \text{N/m}^2 \)).
- WBJEE - 2025
- Physics
- Stress and Strain
- Two blocks of mass \(2 \, \text{kg}\) and \(4 \, \text{kg}\) are connected by a metal wire going over a smooth pulley as shown in the figure. The radius of the wire is \(4.0 \times 10^{-5} \, \text{m}\) and Young's modulus of the metal is \(2.0 \times 10^{11} \, \text{N/m}^2\). The longitudinal strain developed in the wire is \(\frac{1}{\alpha \pi}\). The value of \(\alpha\) is _____. [Use \(g = 10 \, \text{m/s}^2\)]
- JEE Main - 2024
- Physics
- Stress and Strain
- A steel cable with a radius of 1.5 cm supports a chairlift at a ski area. If the maximum stress is not to exceed 108 N m–2, what is the maximum load the cable can support ?
- CBSE Class XI
- Physics
- Stress and Strain
- A piece of copper having a rectangular cross-section of 15.2 mm × 19.1 mm is pulled in tension with 44,500 N force, producing only elastic deformation. Calculate the resulting strain?
- CBSE Class XI
- Physics
- Stress and Strain
- Want to practice more? Try solving extra ecology questions todayView All Questions
