List of top Physics Questions on Errors in Measurement asked in JEE Main

In a vernier callipers, 50 vernier scale divisions are equal to 48 main scale divisions. If one main scale division = 0.05 mm, then the least count of the vernier callipers is ________ mm.
A fractional error in $ x $, $ y $, and $ z $ are 0.1, 0.2, and 0.5 respectively. Find the maximum fractional error in $ x^{-2} y^{3/2} z^{-2/5} $.
The measured value of the length of a simple pendulum is 20 cm with 2 mm accuracy. The time for 50 oscillations was measured to be 40 seconds with 1 second resolution. From these measurements, the accuracy in the measurement of acceleration due to gravity is N%. The value of N is:
To find the spring constant (k) of a spring experimentally, a student commits 2% positive error in the measurement of time and 1% negative error in measurement of mass. The percentage error in determining value of k is :
While measuring the diameter of a wire using a screw gauge, the following readings were noted: Main scale reading is \( 1 \, \text{mm} \) and circular scale reading is equal to 42 divisions. Pitch of the screw gauge is \( 1 \, \text{mm} \), and it has 100 divisions on the circular scale. The diameter of the wire is \( \frac{x}{50} \, \text{mm} \). The value of \( x \) is:
The radius of a sphere is measured to be (7.50 ± 0.85) cm. Suppose the percentage error in its volume is x. The value of x, to the nearest integer, is __________.