List of top Electronics Engineering Questions on Control Systems

If the number of zeros is less than the number of poles, i.e. \( Z<P \), then the value of the transfer function becomes zero for \( s \to \infty \). Hence, some zeros are located at infinity and the order of such zeros will be:
In the root locus plot, the breakaway points
A. Need not always be on the real axis alone.
B. Must lie on the root loci.
C. Must lie between 0 and -1.
Choose the correct answer from the options given below:
The value of the steady state error for first order system, \(\frac{1}{sT+1}\) with Unit Ramp Function will be
Which one of the following statements regarding the effect of the phase lead network is not correct?
Bounded-input bounded-output stability implies asymptotic stability for
A. Completely controllable system
B. Completely observable system
C. Uncontrollable system
D. Unobservable system
Which of the above statements is/are correct?
Choose the correct answer from the options given below:
A second order control system has a damping ratio \(\zeta = 0.8\) and the natural frequency of oscillation \(\omega_n = 12\) rad/sec. Determine the damped frequency of oscillation.
Choose the correct statements from the following
A. The lag-compensation has a pole nearer to the origin.
B. The lag-compensation has a zero nearer to the origin.
C. The lag-compensator decreases the bandwidth.
D. The lag-compensator increases the bandwidth.
The damping ratio and undamped natural frequency of a closed loop system as shown in the figure, are denoted as \(\zeta\) and \(\omega_n\) respectively. The value of \(\zeta\) and \(\omega_n\) are:
(A) \(\zeta = 0.5\)
(B) \(\zeta = 0.707\)
(C) \(\omega_n = 10\) rad/s
(D) \(\omega_n = 100\) rad/s
Choose the correct answer from the options given below:
The Nyquist plot and step response/transfer function is given. Match List-I (Nyquist plot) with List-II (corresponding step response/transfer function).