List of top Painting Questions on Etching asked in CUET (PG)

To achieve fine grains, the following techniques are used: \[ \text{A. Hatching} \] \[ \text{B. Aqua dust} \] \[ \text{C. Dry point} \] \[ \text{D. Burnishing} \] \[ \text{E. Engraving} \]

Identify the right order in the technique: \[ \text{A. Drawing} \] \[ \text{B. Aquatint} \] \[ \text{C. Etching} \] \[ \text{D. Plate} \] \[ \text{E. Ground} \]

Given below are two statements: one is labelled as Assertion (A) and the other is labelled as Reason (R). \[ \text{Assertion (A): In printmaking `ACID' is the main part in creating print ready art work in ETCHING.} \] \[ \text{Reason (R): Zinc, aluminium, copper sheets are mainly used for ETCHING. While stone drawing slate treated with `Acid'.} \] In the light of the above statements, choose the most appropriate answer from the options given below:

The primary ingredient of acid-resist ground is -

The tool used to draw through the ground to expose the metal which will receive acid is called

Match List I with List II:

LIST I		LIST II
A	Water colour	I	Egg
B	Tempera	II	Conte Crayons
C	Pastel	III	Wash
D	Tonal Drawing	IV	Gum or Resin/Wax

Choose the correct answer from the options given below:

Melting to adhere the rosin particles on the metal plate is done by carefully placing the plate -

In a rosin box always place the plate facing -

Ferric chloride is used to etch -

The bubbles which tend to collect along the exposed metal are brushed away gently because -

After etching the plate in acid, the ground is removed by which of the following?

Select the technique that is not used in watercolour painting:

Which painting medium dries fast and is not resoluble after drying?

Arrange the following in order of the printing process:
(A) Drawing
(B) Zinc plate
(C) Acid bite
(D) Ground
(E) Inking and Printing

The wood block used for a woodcut print is made from?

Match List I with List II:

LIST I		LIST II
A	Paper	I	Gesso
B	Canvas	II	Lime plaster
C	Fresco Wall	III	Wax-based hard ground
D	Intaglio Plate	IV	Plant fibers

Choose the correct answer from the options given below:

Match List I with List II:

LIST I		LIST II
A	Pointillism	I	One layer painting technique
B	S’graffito	II	Small dabs of pure colours
C	Alla Prima	III	Painting wet paint on wet paint
D	Wet on Wet	IV	Sketching into wet paint layer

Choose the correct answer from the options given below:

In aquatint, the depth of tone is controlled by:

Acid is used in:

In etching, soft ground is used: