Exams
Subjects
Classes
Home
AP EAPCET
Physics
List of top Physics Questions on communication systems asked in AP EAPCET
If the wavelength of the signal to be transmitted by an antenna is increased by \(2\) times, then the effective power radiated by the antenna
AP EAPCET - 2026
AP EAPCET
Physics
communication systems
A TV transmitting antenna is 81 m tall. Service area covered, if the receiving antenna is at the ground level, will be about:
AP EAPCET - 2026
AP EAPCET
Physics
communication systems
A TV tower has a height of 100m. To double the coverage distance of the tower, the height of the tower must be increased by:
AP EAPCET - 2026
AP EAPCET
Physics
communication systems
In a signal transmission, if the amplitude of the carrier wave is 10 V and the modulation index is 0.6, then the amplitude of the side bands is:
AP EAPCET - 2022
AP EAPCET
Physics
communication systems
A message signal of frequency \(8\ \text{kHz}\) and peak voltage \(12\ \text{V}\) is used to modulate a carrier of frequency \(1.2\ \text{MHz}\) and peak voltage \(20\ \text{V}\). The modulation index is
AP EAPCET - 2022
AP EAPCET
Physics
communication systems
The frequency suitable for beyond the horizon communication using sky wave is
AP EAPCET - 2022
AP EAPCET
Physics
communication systems
The frequency band for downlink satellite communication is in the range:
AP EAPCET - 2022
AP EAPCET
Physics
communication systems
A TV transmitting antenna is 70 m tall. If the receiving antenna is at ground level, then the area it can cover is: (Radius of Earth = 6400 km)
AP EAPCET - 2022
AP EAPCET
Physics
communication systems
A radio antenna receiver works at \((10.5 \pm 4.5)\,MHz\) with an effective bandwidth of \(9\,MHz\). The corresponding wavelength bandwidth is:
AP EAPCET - 2022
AP EAPCET
Physics
communication systems
For an amplitude modulated (AM) wave, the minimum amplitude is 4.0 V and the modulation index is 0.4. The maximum amplitude is:
AP EAPCET - 2022
AP EAPCET
Physics
communication systems
A carrier wave of peak voltage \(60\,\text{V}\) is used to transmit a message signal. Then the peak voltage of the modulating signal in order to have a modulation index of \(90\%\) is
AP EAPCET - 2022
AP EAPCET
Physics
communication systems