List of top Electronics and Communication Engineering Questions on Electrical Circuits asked in TS PGECET

A \(10~\Omega\) resistor, a \(1~H\) inductor and a \(1~F\) capacitor are connected in parallel. The combination is driven by a unit step current. Under steady-state conditions, the source current flows through

An RLC series circuit has \[ R=1\Omega,\quad L=1H,\quad C=1F. \] Damping ratio of the circuit will be

The condition for symmetry in ABCD two-port parameters is

What is the short-circuit impedance at port 1 for the given two-port network?

For the given circuit, during maximum power transfer, the value of \(R\) and the magnitude of the power delivered to \(R\) are

In the given circuit, if Thevenin's equivalent resistance is \(2~\Omega\) when seen from the open terminals, then the value of \(R\) is

The equivalent resistance between the terminal points \(X\) and \(Y\) in the given circuit is