List of top Civil Engineering Questions on Structural Analysis asked in TS PGECET

If the unknown forces in a system can be determined by the equations of equilibrium alone, then it is called as

The force of friction between the dam and soil to avoid sliding of masonry dam should be more than the water pressure per meter length by at least

For a linear structural system, minimization of potential energy yields

A uniform beam of length \(2L\) and flexural rigidity \(EI\) is fixed at both the ends. What is the moment required at the centre of the span for unit rotation?

A fixed beam of span \(L\) rises by \(\Delta\) upwards at right hand support. The fixed end moment at right hand support will be

In the case of stiffness method of structural analysis, the quantity taken as redundant is

Rotation contribution at the fixed end of a member is

Redundant frames may be analysed by using

The bending moment diagram for a cantilever beam subjected to a couple at the free end would be a

The flexibility matrix method is also known as

A simply supported beam of span \(6\,\mathrm{m}\) carries a central point load. If the plastic moment capacity is \(90\,\mathrm{kN\!-\!m}\), the collapse load is

A propped cantilever beam has a degree of static indeterminacy equal to

A three-hinged arch of span \(8\,\mathrm{m}\) carries a central point load of \(32\,\mathrm{kN}\). If the central rise is \(2\,\mathrm{m}\), the horizontal thrust is

A cable of span \(10\,\mathrm{m}\) carries a uniformly distributed load of \(6\,\mathrm{kN/m}\) over the entire span. If the central dip is \(3\,\mathrm{m}\), the horizontal tension is