Question:medium
What is the ordinate of influence line at Q for reaction at S as shown in figure given below ? (Beam P-Q-R-S with internal hinge at Q, supports at P, R, and S. Distances: PQ=3m, QR=3m, RS=6m)
What is the ordinate of influence line at Q for reaction at S as shown in figure given below ? (Beam P-Q-R-S with internal hinge at Q, supports at P, R, and S. Distances: PQ=3m, QR=3m, RS=6m)
Show Hint
For statically determinate beams with hinges, ILDs are always composed of straight line segments. The hinge allows the beam to rotate freely, changing the direction of the line.
Updated On: May 20, 2026
- 0.0
- 2.0
- 0.5
- 0.2
Show Solution
The Correct Option is C
Solution and Explanation
Was this answer helpful?
0
Top Questions on Strength of Materials
- A rectangular section has width $b$ and depth $d$ and a symmetrical triangular section has base $b$ and depth $d$. The ratio of moment of inertia of rectangular section to that of triangular section with respect to their respective centroidal axis will be:
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
A steel wire of $20$ mm diameter is bent into a circular shape of $10$ m radius. If modulus of elasticity of wire is $2\times10^{5}\ \text{N/mm}^2$, then the maximum bending stress induced in wire is:
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
- Shape of the "shear force diagram" for a simply supported beam subjected to pure moment $M$ at the center of span, will be:
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
- Which of the following statements is correct?
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
- Want to practice more? Try solving extra ecology questions todayView All Questions