Question:medium
The lengthening joints used in timber constructive are :
• [A.] Cogged joint
• [B.] Lapped joint
• [C.] Fished joint
• [D.] Dove tailed joint
• [E.] Mitred joint Choose the correct answer from the options given below :
The lengthening joints used in timber constructive are :
• [A.] Cogged joint
• [B.] Lapped joint
• [C.] Fished joint
• [D.] Dove tailed joint
• [E.] Mitred joint Choose the correct answer from the options given below :
Show Hint
Timber joint applications:
• Lapped joint → lengthening
• Fished joint → strengthening and lengthening
• Dovetail joint → furniture corners
• Mitred joint → frame corners
• Lapped joint → lengthening
• Fished joint → strengthening and lengthening
• Dovetail joint → furniture corners
• Mitred joint → frame corners
Updated On: May 19, 2026
- A and D
- B and C
- C and D
- B and E
Show Solution
The Correct Option is B
Solution and Explanation
Was this answer helpful?
0
Top Questions on Materials and Structural Systems
For the frame shown in the figure below, the maximum moment in the left column shall be (Assuming Moment of Inertia (I) of all the members is same):
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Materials and Structural Systems
- Match LIST-I with LIST-II: \[\begin{array}{|c|l|} \hline \textbf{LIST-I (Assumption/ theorem)} & \textbf{LIST-II (Type of analysis/ strength determination)} \\ \hline \text{A. Plane section remains plane before and after bending} & \text{I. Elastic analysis and superposition} \\ \hline \text{B. Material is elastic and deformations/ deflection is small} & \text{II. Linear strain distribution} \\ \hline \text{C. Uniqueness theorem} & \text{III. Non-linear analysis and buckling load} \\ \hline \text{D. Large deformation} & \text{IV. Collapse load} \\ \hline \end{array}\] Choose the most appropriate match from the options given below:
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Materials and Structural Systems
- Match LIST-I with LIST-II:\[\begin{array}{|c|c|} \hline \textbf{LIST-I (Type of structure)} & \textbf{LIST-II (Structural behavior)} \\ \hline \text{A. Truss} & \text{I. Bending} \\ \hline \text{B. Beam} & \text{II. Twisting} \\ \hline \text{C. Column} & \text{IV. Buckling} \\ \hline \text{D. Shaft} & \text{III. Shortening} \\ \hline \end{array}\] Choose the most appropriate match from the options given below:
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Materials and Structural Systems
- As per human anthropometrics, find from the below given options most accurate dimension for the height of kitchen counter top ?
- CUET (PG) - 2026
- Architecture and Planning
- Materials and Structural Systems
- Want to practice more? Try solving extra ecology questions todayView All Questions