Question:medium
Match the LIST-I with LIST-II:
Match the LIST-I with LIST-II:
Show Hint
Memory check: Pasteur = Oxygen is good (saves glucose). Crabtree = Too much sugar is bad (forces fermentation). Both are critical for optimizing yield in industrial fermenters.
Updated On: May 20, 2026
- A-II, B-III, C-I, D-IV
- A-II, B-I, C-IV, D-III
- A-IV, B-II, C-I, D-III
- A-III, B-IV, C-II, D-I
Show Solution
The Correct Option is B
Solution and Explanation
Was this answer helpful?
0
Top Questions on Heat and Mass Transfer
- Match LIST-I with LIST-II and select the correct answer using the codes given below the lists.\[\begin{array}{|c|c|} \hline \textbf{LIST-I} & \textbf{LIST-II} \\ \hline \text{A. Stanton number} & \text{I. Natural convection for ideal gases} \\ \hline \text{B. Grashof number} & \text{II. Mass Transfer} \\ \hline \text{C. Peclet number} & \text{III. Forced convection} \\ \hline \text{D. Schmidt number} & \text{IV. Forced convection for small Prandtl number} \\ \hline \end{array}\] Choose the most appropriate answer from the options given below:
- CUET (PG) - 2025
- Chemical, Thermal and Polymer Engineering
- Heat and Mass Transfer
- Two rods, one of length L and the other of length 2L, are made of the same material and have the same diameter. The two ends of the longer rod are maintained at 100°C. One end of the shorter rod is maintained at 100°C while the other end is insulated. Both the rods are exposed to the same environment at 40°C. The temperature at the insulated end of the shorter rod is measured to be 55°C. The temperature at the mid point of the longer rod would be:
- CUET (PG) - 2025
- Chemical, Thermal and Polymer Engineering
- Heat and Mass Transfer
- For steady flow and constant value of conductivity, the temperature distribution for a plane wall is:
- CUET (PG) - 2025
- Chemical, Thermal and Polymer Engineering
- Heat and Mass Transfer
- Baffles are provided in heat exchangers to:
- CUET (PG) - 2025
- Chemical, Thermal and Polymer Engineering
- Heat and Mass Transfer
- Want to practice more? Try solving extra ecology questions todayView All Questions