Question:medium
Match List - I with List - II.
Choose the correct answer from the options given below :
Match List - I with List - II.
Choose the correct answer from the options given below :
Choose the correct answer from the options given below :
Show Hint
The shape factor depends only on the geometry of the cross-section. For an I-section, it typically ranges between 1.12 and 1.15, indicating less reserve strength compared to solid sections.
Updated On: May 20, 2026
- A-I, B-III, C-IV, D-II
- A-II, B-I, C-II, D-IV
- A-IV, B-II, C-III, D-I
- A-II, B-IV, C-I, D-III
Show Solution
The Correct Option is D
Solution and Explanation
Was this answer helpful?
0
Top Questions on Strength of Materials
- A rectangular section has width $b$ and depth $d$ and a symmetrical triangular section has base $b$ and depth $d$. The ratio of moment of inertia of rectangular section to that of triangular section with respect to their respective centroidal axis will be:
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
A steel wire of $20$ mm diameter is bent into a circular shape of $10$ m radius. If modulus of elasticity of wire is $2\times10^{5}\ \text{N/mm}^2$, then the maximum bending stress induced in wire is:
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
- Shape of the "shear force diagram" for a simply supported beam subjected to pure moment $M$ at the center of span, will be:
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
- Which of the following statements is correct?
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
- Want to practice more? Try solving extra ecology questions todayView All Questions