Question:medium

Jigging operation depends on the difference in:

Show Hint

Jigging is a gravity separation method based on density differences.

Updated On: Jun 29, 2026

Surface chemistry
Electrical conductivity
Specific gravity
Magnetic susceptibility

Show Solution

The Correct Option is C

Solution and Explanation

Was this answer helpful?

0

Top Questions on Mechanical Theory

A 0.500-inch diameter aluminum bar is subjected to a force of 2500 lb. The engineering stress in pounds per square inch (psi) on the bar is:
- CUET (PG) - 2024
- Material Science and Technology
- Mechanical Theory
View Solution
A 1.25 cm diameter bar is subjected to a load of 2500 kg. Calculate the engineering stress on the bar in megapascals (MPa):
- CUET (PG) - 2024
- Material Science and Technology
- Mechanical Theory
View Solution
Aluminium alloy after failure has a final length of 2.195 in and a final diameter of 0.398 in at the fractured surface. The percentage of elongation and reduction in area is:
- CUET (PG) - 2024
- Material Science and Technology
- Mechanical Theory
View Solution
A load of \(4.0 \, \text{kg}\) is suspended from a ceiling fan through a steel wire of radius \(2.0 \, \text{mm}\). The tensile stress developed in the wire when equilibrium is achieved is: (Take \(g = 9.81 \, \text{m/s}^2\)):
- CUET (PG) - 2024
- Material Science and Technology
- Mechanical Theory
View Solution
Want to practice more? Try solving extra ecology questions todayView All Questions

Questions Asked in TS PGECET exam

The Eigenvalues of \(3\times 3\) real matrix A are 1, 2, 3 then \(A^{-1} =\)

TS PGECET - 2026
Linear Algebra

Let \(A=\begin{bmatrix} 1 & 1 & 0 \\ 0 & 1 & 1 \\ 0 & 0 & 1 \end{bmatrix}\). If \(u_1\) and \(u_2\) are column matrices such that \(Au_1 = \begin{bmatrix} 2 \\ 1 \\ 0 \end{bmatrix}\) and \(Au_2 = \begin{bmatrix} 1 \\ 0 \\ 1 \end{bmatrix}\), then \(u_1 - u_2\) is

TS PGECET - 2026
Matrices

Let \(a,b\) and \(c\) be real numbers. Suppose there exist real numbers \(x,y,z\) which are not all zero such that the system of equations \(x = cy + bz\), \(y = cx + az\) and \(z = bx + ay\) has a non-zero solution then \(\left(a+b+c\right)^2 =\)

TS PGECET - 2026
Determinants

For the function \(f(x)=\log x\), the number \(c\) strictly between \(e^2\) and \(e^3\) that satisfies \(f'(c)=\dfrac{f(e^3)-f(e^2)}{e^3-e^2}\) is

TS PGECET - 2026
Calculus