Question:medium
In the limit state approach, the spacing of main reinforcement primarily controls
In the limit state approach, the spacing of main reinforcement primarily controls
Show Hint
In RCC design:
• Bar spacing controls crack width.
• Effective depth mainly controls deflection.
• Concrete cover primarily improves durability.
• Bar spacing controls crack width.
• Effective depth mainly controls deflection.
• Concrete cover primarily improves durability.
Updated On: Jul 23, 2026
- Collapse
- Cracking
- Deflection
- Durability
Show Solution
The Correct Option is B
Solution and Explanation
Was this answer helpful?
0
Top Questions on Concrete
M20 concrete as per IS 456: 2000 refers to concrete with a design mix having
- GATE CE - 2023
- Civil Engineering
- Concrete
- Consider the beam section shown in the figure, with \( y \) indicating the depth of neutral axis (NA). The section is only subjected to an increasing bending moment. It is given that \( y = 18.75 \, {mm} \), when the section has not yielded at the top and bottom fibres. Further, \( y \) decreases to 5 mm, when the entire section has yielded. The shape factor of the section is ........ (rounded off to 2 decimal places).
\begin{center} \includegraphics[width=8cm]{53.png} \end{center} - Consider a reinforced concrete beam section of 300 mm width and 700 mm depth. The beam is reinforced with the tension steel of 2000 mm² area at an effective cover of 50 mm. Concrete in the tension zone is assumed to be cracked. Assume the modular ratio of 12 and Young's modulus of 200 GPa for steel. When the extreme fibre in the compression zone undergoes the strain of 0.0004 due to the applied bending moment, the stress in the steel (in MPa) is ..... (rounded off to the nearest integer).
Consider the beam section shown in the figure, with \( y \) indicating the depth of neutral axis (NA). The section is only subjected to an increasing bending moment. It is given that \( y = 18.75 \, {mm} \), when the section has not yielded at the top and bottom fibres. Further, \( y \) decreases to 5 mm, when the entire section has yielded. The shape factor of the section is ........ (rounded off to 2 decimal places).
- Want to practice more? Try solving extra ecology questions todayView All Questions