Question:medium
Force measurement using strain gauges is based on the principle of
Force measurement using strain gauges is based on the principle of
Show Hint
The gauge factor of a strain gauge is
\[
\boxed{
GF=\frac{\Delta R/R}{\varepsilon}
}
\]
where \(\varepsilon\) is the strain.
Updated On: Jul 14, 2026
- Piezoelectric effect
- Hall effect
- Change in resistance due to strain
- Change in capacitance
Show Solution
The Correct Option is C
Solution and Explanation
Was this answer helpful?
0
Top Questions on Transducers for industrial instrumentation
- A thermistor has a resistance of $10\text{ k}\Omega$ at $25^\circ\text{C}$ and $1\text{ k}\Omega$ at $100^\circ\text{C}$. The range of operation of is $0^\circ\text{C}$ to $150^\circ\text{C}$. The excitation voltage is $5\text{V}$ and a series resistance of $1\text{ k}\Omega$ is connected to the thermistor. The power dissipated in the thermistor is}
- AP PGECET - 2026
- Instrumentation Engineering
- Transducers for industrial instrumentation
- A resistance potentiometer is:
- AP PGECET - 2026
- Instrumentation Engineering
- Transducers for industrial instrumentation
- A resistance potentiometer has a total resistance of $10000\ \Omega$ and is rated $4\text{ W}$. If the range of the potentiometer is $0$ to $100\text{ mm}$, then its sensitivity in $\text{V/mm}$ is:
- AP PGECET - 2026
- Instrumentation Engineering
- Transducers for industrial instrumentation
- Optical sensors used for the displacement measurement works on the principle:
- AP PGECET - 2026
- Instrumentation Engineering
- Transducers for industrial instrumentation
- Want to practice more? Try solving extra ecology questions todayView All Questions