Question:medium

Aluminum alloy stress–strain curve shows

Show Hint

Because Aluminum alloys exhibit smooth yielding without a distinct yield point, you must always use the \(0.2%\) offset line method to determine their design yield strength.

Updated On: Jun 25, 2026

Sharp yield point
Large elastic region only
Brittle fracture
Smooth yielding

Show Solution

The Correct Option is D

Solution and Explanation

Was this answer helpful?

0

Top Questions on Strength of Materials

A rectangular section has width $b$ and depth $d$ and a symmetrical triangular section has base $b$ and depth $d$. The ratio of moment of inertia of rectangular section to that of triangular section with respect to their respective centroidal axis will be:
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
View Solution
A steel wire of $20$ mm diameter is bent into a circular shape of $10$ m radius. If modulus of elasticity of wire is $2\times10^{5}\ \text{N/mm}^2$, then the maximum bending stress induced in wire is:
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
View Solution
Shape of the "shear force diagram" for a simply supported beam subjected to pure moment $M$ at the center of span, will be:
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
View Solution
Which of the following statements is correct?
- CUET (PG) - 2025
- Civil Structural and Transport Engineering
- Strength of Materials
View Solution
Want to practice more? Try solving extra ecology questions todayView All Questions

Questions Asked in TS PGECET exam

The Eigenvalues of \(3\times 3\) real matrix A are 1, 2, 3 then \(A^{-1} =\)

TS PGECET - 2026
Linear Algebra

Let \(A=\begin{bmatrix} 1 & 1 & 0 \\ 0 & 1 & 1 \\ 0 & 0 & 1 \end{bmatrix}\). If \(u_1\) and \(u_2\) are column matrices such that \(Au_1 = \begin{bmatrix} 2 \\ 1 \\ 0 \end{bmatrix}\) and \(Au_2 = \begin{bmatrix} 1 \\ 0 \\ 1 \end{bmatrix}\), then \(u_1 - u_2\) is

TS PGECET - 2026
Matrices

Let \(a,b\) and \(c\) be real numbers. Suppose there exist real numbers \(x,y,z\) which are not all zero such that the system of equations \(x = cy + bz\), \(y = cx + az\) and \(z = bx + ay\) has a non-zero solution then \(\left(a+b+c\right)^2 =\)

TS PGECET - 2026
Determinants

For the function \(f(x)=\log x\), the number \(c\) strictly between \(e^2\) and \(e^3\) that satisfies \(f'(c)=\dfrac{f(e^3)-f(e^2)}{e^3-e^2}\) is

TS PGECET - 2026
Calculus