Question:easy
A reinforced slab built monolithically with the supporting columns and is reinforced in two or more directions, without any provision of beams, is called a____
A reinforced slab built monolithically with the supporting columns and is reinforced in two or more directions, without any provision of beams, is called a____
Show Hint
Flat slab:
\[
\boxed{
\text{Slab directly supported on columns without beams.}
}
\]
Drop panels and column capitals may be provided to improve shear resistance.
Updated On: Jul 23, 2026
- Two way slab
- Flat slab
- Continuous slab
- Circular slab
Show Solution
The Correct Option is B
Solution and Explanation
Step 1: list the key features given in the question.
The slab is cast monolithically with its columns, it is reinforced in two or more directions, and there are no supporting beams anywhere in the system.
Step 2: compare against each slab type.
A two way slab and a continuous slab both still rest on supporting beams, and a circular slab is simply a shape description, not a structural system without beams. Only a flat slab is defined as a slab resting directly on columns, with the column heads or drop panels alone taking the place of beams.
Step 3: match the description.
Since beams are completely absent here, this system fits the definition of a flat slab exactly.
\[ \boxed{\text{Flat slab (option B)}} \]
The slab is cast monolithically with its columns, it is reinforced in two or more directions, and there are no supporting beams anywhere in the system.
Step 2: compare against each slab type.
A two way slab and a continuous slab both still rest on supporting beams, and a circular slab is simply a shape description, not a structural system without beams. Only a flat slab is defined as a slab resting directly on columns, with the column heads or drop panels alone taking the place of beams.
Step 3: match the description.
Since beams are completely absent here, this system fits the definition of a flat slab exactly.
\[ \boxed{\text{Flat slab (option B)}} \]
Was this answer helpful?
0
Top Questions on Concrete
M20 concrete as per IS 456: 2000 refers to concrete with a design mix having
- GATE CE - 2023
- Civil Engineering
- Concrete
- Consider the beam section shown in the figure, with \( y \) indicating the depth of neutral axis (NA). The section is only subjected to an increasing bending moment. It is given that \( y = 18.75 \, {mm} \), when the section has not yielded at the top and bottom fibres. Further, \( y \) decreases to 5 mm, when the entire section has yielded. The shape factor of the section is ........ (rounded off to 2 decimal places).
\begin{center} \includegraphics[width=8cm]{53.png} \end{center} - Consider a reinforced concrete beam section of 300 mm width and 700 mm depth. The beam is reinforced with the tension steel of 2000 mm² area at an effective cover of 50 mm. Concrete in the tension zone is assumed to be cracked. Assume the modular ratio of 12 and Young's modulus of 200 GPa for steel. When the extreme fibre in the compression zone undergoes the strain of 0.0004 due to the applied bending moment, the stress in the steel (in MPa) is ..... (rounded off to the nearest integer).
Consider the beam section shown in the figure, with \( y \) indicating the depth of neutral axis (NA). The section is only subjected to an increasing bending moment. It is given that \( y = 18.75 \, {mm} \), when the section has not yielded at the top and bottom fibres. Further, \( y \) decreases to 5 mm, when the entire section has yielded. The shape factor of the section is ........ (rounded off to 2 decimal places).
- Want to practice more? Try solving extra ecology questions todayView All Questions