Question:medium
A metal cube has edge length 0.1 m. The bulk modulus of the metal is \(1.4 \times 10^{11} \, \text{N/m}^2\). When subjected to hydraulic pressure, the volume contraction of the cube is \(5 \times 10^{-2} \, \text{cm}^3\). The applied pressure is
A metal cube has edge length 0.1 m. The bulk modulus of the metal is \(1.4 \times 10^{11} \, \text{N/m}^2\). When subjected to hydraulic pressure, the volume contraction of the cube is \(5 \times 10^{-2} \, \text{cm}^3\). The applied pressure is
Show Hint
Always convert cm³ to m³ before applying bulk modulus formula.
Updated On: Jun 20, 2026
- \(2 \times 10^6 \, \text{Pa}\)
- \(1.4 \times 10^7 \, \text{Pa}\)
- \(7 \times 10^6 \, \text{Pa}\)
- \(5 \times 10^5 \, \text{Pa}\)
Show Solution
The Correct Option is C
Solution and Explanation
Was this answer helpful?
0
Top Questions on elastic moduli
A steel wire of length 4.7 m and cross-sectional area 3.0 × 10-5 m2 stretches by the same amount as a copper wire of length 3.5 m and cross-sectional area of 4.0 × 10–5 m2 under a given load. What is the ratio of the Young’s modulus of steel to that of copper?
- CBSE Class XI
- Physics
- elastic moduli
- How much should the pressure on a litre of water be changed to compress it by 0.10%? carry one quarter of the load.
- CBSE Class XI
- Physics
- elastic moduli
Two wires of diameter 0.25 cm, one made of steel and the other made of brass are loaded as shown in Fig. 8.11. The unloaded length of steel wire is 1.5 m and that of brass wire is 1.0 m. Compute the elongations of the steel and the brass wires.
- CBSE Class XI
- Physics
- elastic moduli
Read the following two statements below carefully and state, with reasons, if it is true or false.
(a) The Young’s modulus of rubber is greater than that of steel;
(b) The stretching of a coil is determined by its shear modulus.
- CBSE Class XI
- Physics
- elastic moduli
- Want to practice more? Try solving extra ecology questions todayView All Questions