List of practice Questions

In an orthogonal straight turning process, the feed is 0.1 mm/rev and the depth of cut is 0.5 mm. In ASA system, the side cutting edge angle of the cutting tool is 0°. The width (in mm) of the chip is ............ (Rounded off to one decimal place)
The pitch of the single-start lead screw of a lathe is 6 mm. It is used to cut double start thread of 3 mm pitch on a cylindrical work piece. During the thread cutting, the spindle rotates at 400 revolutions per minute (RPM). The speed (in RPM) of the lead screw is ............ (Answer in integer)