List of top Fashion Studies Questions on BASICS OF GARMENT MAKING asked in CUET (UG)

Which of the following considerations should be kept in mind while selecting interfacing for a garment?
(A) Interfacing fabric should overpower garment fabric.
(B) Interfacing should complement and reinforce garment fabric.
(C) Fabric for interfacing and garment need not to be identical but have some care requirements.
(D) Fabric for interfacing and garment must be identical but should have different care requirements.
The facing strip used to finish a round neckline is cut:
The process of pulling ‘off-grain’ fabric diagonally at the opposite ends to make it ‘on-grain’ is known as:
Which of the following results in deviation of grainline/creating off-grain garment?
(A) Incorrect cutting of fabric.
(B) Incorrect stitching.
(C) Insufficient ease in the garment.
(D) Poor posture/figure irregularities.
Arrange the following steps to straighten a slightly off-grain fabric in the correct order.
(A) Fold the fabric lengthwise.
(B) Pin the selvedges together.
(C) Lay the fabric flat.
(D) Iron from the selvedges to the fold.
For garments to be cut on a straight grain, the grainline is drawn:
Match List-I with List-II:
List-I (Trims)List-II (Examples)
(A) Lacings(I) Lettuce Edge
(B) Linear Trims(II) Buckles and Locks
(C) Hardwares(III) Spaghetti Straps
(D) Shaped Edges(IV) Corded Seam
Choose the correct answer from the options given below:
Which of the following is used to finish the raw edges of fabric?
Which of the following lines passes through the apex?
Which of the following is NOT true about dart manipulation?
The method in which two-dimensional fabric is made to fit on the dress form to achieve desired look:
Identify the reason behind the strain and pull on the garment if we stitch the darts till the apex.
Which of the following is an example of ‘Roll Collar’:
Identify the color fixer which can be prepared at home:
What are the important considerations while selecting a garment for infants:
(A) Onset of puberty
(B) Age
(C) Weight
(D) Size of the head
The length of the pattern piece required for a continuous placket:
Which of the following points should be kept in mind while making necklines?
(A) Measurement which is taken diagonally should be marked diagonally on the pattern.
(B) If neckline is made wider in front, same needs to be done for back.
(C) Avoid deeper neckline for both front and back at the same time.
(D) If neckline is made wider in front, back neckline need not to be made wider.
Which of the following trims may need preshrinking?