List of top Textile Design Questions on Yarn asked in CUET (PG)

Mohair fibre is obtained from:

Assertion (A): Wool has a unique property to produce felt fabrics directly from wool fibres.
Reason (R): Wool is hygroscopic in nature and has a standard moisture regain of 13.6-16 percent. Choose the most appropriate answer from the options given below:

Complex yarns are uneven in texture, providing an interesting appearance to the fabric. Corded complex yarns have the following components:
• [A.] Base yarn
• [B.] Bulky yarn
• [C.] Loop yarn
• [D.] Effect yarn
• [E.] Binder yarn Choose the correct answer from the options given below :

The types of unconventional yarn spinning methods include:
• [A.] Open-end spinning
• [B.] Twist-less spinning
• [C.] Vortex spinning
• [D.] Close-end spinning
• [E.] Friction-less spinning Choose the correct answer from the options given below :

Sequence the steps of preparing the warp yarn for weaving.
A. Sizing
B. Creeling
C. Drawing in
D. Denting
E. Warping
Choose the correct answer from the options given below :

Calculate the count of the two fold cotton yarn composed of 24s and 40s singles.

Converts 100s cotton count in denier system.

Given below are two statements: one is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): Panipat is the hub for textile recycling, where large quantities of second-hand clothing are shredded and respun to produce shoddy yarn. Reason (R): There are some conscious designers that are incorporating zero waste design to avoid fabric wastage. In the light of the above statements, choose the most appropriate answer from the options given below:

The ............... is the space between the two halves of the warp in which the weaver places the weft thread/yarn just after the reed while weaving on a loom.

Calculate the total number of ends/yarn in 36 inches wide fabric with 76 reed count and 0.5 inch of selvedge on each side (assuming 2 ends/yarn per dent for body as well as for selvedge).

A mass of fibers lying indiscriminately in all directions, not spun or twisted into yarn and not interworked in any regular order, can be made into a firm fabric using processes involving heat, pressure, friction etc. is called as ................

............... Weave is a weave in which warp yarn of a pair is moved from side to side using doup attachment on loom and is also called gauze weave. This weave allows weft yarns to be held apart without slipping and forms open plain weave.

Sequence of steps for production and processing of Silk yarn.
A. Reeling
B. Stifling and Brushing
C. Degumming
D. Throwing
Choose the correct answer from the options given below:

Novelty yarn with closed loops at intervals used for textural interest and warmth generation from air trapping is called as ................

If there are 72 dents per 2 inches in a reed and 2 ends/yarn are drawn from each dent, what will be ends/yarn per inch of the fabric?

Select the extra step which is used in Worsted yarn spinning than Woolen yarn spinning.

In triaxial weaving three sets of yarns (two warps and one weft) are woven at an angle of ........... degrees.

The cost of production of a woven fabric depends on ...........
A. Type of yarn used
B. Type of fiber used
C. Type of dyeing used
D. Thread Count of the fabric

Corded complex yarns consist of:
A. Base Yarn
B. Effect Yarn
C. Binder Yarn
D. Fancy Yarn
Choose the correct answer from the options given below:

The diameter of yarn is ........... to the square roots of the cotton count.

114 meters of yarn was found to weigh 3 grammes. Calculate the count of the yarn.